About Us              Signage            POP            SDS Channel Bender              PUK4c           Materials            Gallery            Contact Us
EASY CHANNEL BENDER
BETTER LETTERS. FASTER.

Our flagship automated channel letter bender, the Super ChannelBender is the ideal, overall solution for precision forming of both flanged and reverse channel letters in 1? to 8? heights. In addition to .026? to .063? thick aluminum, and depending on thickness, the Super can process brass, bronze, and stainless material as well as LetterBox® and LetterForm®, our proprietary Trimless® return materials. These Trimless materials completely eliminate the need for conventional plastic trim cap, LetterBox and LetterForm enable sign makers to fabricate premium Trimless channel letters.

The Super ChannelBender’s unique ability to broach return material results in crisper, sharper bends and intricate shapes, previously thought impossible to automate, like ¼? serifs.  Broaching is a built-in, patented processing component that cuts a shallow groove vertically across the interior face of the return at the precise location of all sharp, angled bends.

Power                           
Spesification


Super ChannelBender



BETTER LETTERS. FOR LESS.

The Eco ChannelBender is the ideal solution for those who want an automated channel letter bender dedicated to precision forming of non-flanged letters in heights from 1? to 5?. In addition to .026? to .063? thick aluminum, and depending on thickness, brass, bronze, and stainless material, the Eco can also process LetterBox® and LetterForm®, our proprietary Trimless®  return materials. Using these return materials eliminates the need for conventional plastic trim cap, thereby enabling the fabrication of premium Trimless channel letters.

The Eco ChannelBender’s unique ability to broach return material results in crisper, sharper bends and enables intricate shapes, previously thought impossible to automate, like ¼? serifs.  Broaching is a built-in, patented processing component that cuts a shallow groove vertically across the interior face of the return at the precise location of all sharp, angled bends.

Dimensions
(W x D x H)
Spesification
Super ChannelBender
Features
System
Oil Pump
220VAC, 15A, 50/60Hz, 1P
220VAC, 6.4/3.7A (maximum/typical)
System
Coil Cassette
Profile Table
77? × 39.5? × 59?
30? × 30? × 57?
Non
Lateral routing of angles
Maximum flange thickness
V-cut (relief notch)
Flange depth (straight)
Cut-off tool for batch processing
None
Up to .063? (1.6 mm)
35°, 60°, 100°, 130° on flange
Adjustable – 1/4?, 3/8? or 1/2?
Yes
Bending
Maximum angle
Smallest radius that can be bent a full 180°
Shortest distance from end to a sharp bend
Shortest distance from start to a sharp bend
100°
.3125? (8 mm) radius
1.57? (40 mm)
.4? (10 mm)
Coil Material
Outside diameter
Thickness
Height
26?
.032? – .063? (.8 mm – 1.6 mm)
2.375? – 10? (60 mm – 254 mm)
System
220VAC, 15A, 50/60Hz, 1P
Power
Dimensions
(W x D x H)
System
Coil Cassette
85.75? × 35.5? × 65?
30? × 30? × 57?
Features
Vertical routing of angles (broaching)
Batch processing
Adjustable depth (V-type)
Yes
Bending
Maximum angle
Smallest radius that can be bent a full 180°
Shortest distance from end to a sharp bend
Shortest distance from start to a sharp bend
120° (coil), 100° (LetterBox)
.2? (5 mm) radius (coil), .6? (15 mm) radius (LetterBox)
.2632? (6 mm)
.2632? (6 mm)
Coil Material
Outside diameter
Thickness
Height
26? only
.026? – .063? (.66 mm – 1.6 mm)
1? – 5? (25 mm – 127 mm)
LetterBox
Thickness
Height
Length
1.2 mm (approximately .050?)
60 mm and 100 mm
3 m (approx. 10') strip or 27 m (approx. 88') coil
LetterForm
Thickness
Height
Length
1 mm (approximately .040?)
37 mm, 60 mm and 100 mm
30 m (approx. 100') coil
Stainless Steel
Maximum thickness
20 Ga

EASY TO MAKE.
EASY TO USE.

Compact, fast and easy to use, the EasyTrimmer processes most of the market’s conventional plastic trim cap automatically cutting to length, notching, and marking reverse bend points for manual bending. With its wide range of eight V-cut sizes – from 45° to 120° – the Easy Trimmer creates beautiful, crisp, corners that add a precise, clean appearance to your trim capped channel letters and signs.

When used in concert with any of AdamsTech’s ChannelBender series automated channel letter benders, the EasyTrimmer’s accuracy, speed, and reliability dramatically increase your shop’s efficiency and productivity.
Spesification
Super ChannelBender
Power
System
220VAC, 15A, 50/60Hz, 1P
Dimensions
(W x D x H)
System
Coil Cassette
63? × 26.75? × 53.25?
150' industry standard coil
Features
V-cut (relief notch)
Cut-off tool for batch processing
45°, 60°, 70°, 80°, 90°, 100°, 110°, 120° on flange
Yes
Bending
Maximum angle
Manual bending at marked bend points
Coil Material
Outside diameter
Thickness
Height
150' industry standard coil
0.04? (1.0 mm)
1?, 1.5?, 2.0? (25 mm, 38 mm, 50.8 mm)
ECO CHANNEL BENDER
EASY TRIMMER
OFFICE BOX INDONESIA

Head Office & Show Room
Grand Wijaya Center, Blok C No.39 Jl. Wijaya 2,
Kebayoran baru, Jakarta Selatan.

Phone : 021-7200285, 021-7200185,
email : company@officebox.co.id
Our Machine